Tim Holtz Stamper's Anonymous Summer 2024 - Floristry Card Set

I'm blowing the dust off this blog...it's been a minute. Hello friends! This week was the launch of the Tim Holtz Stamper's Anonymous Everyday 2 Summer Stamp Sets, and the LIVE is currently on showing all the sets as well as samples from the Makers. I'm always awestruck with the creations, and it amazes me that you can do so many things with the same set of stamps. I created five makes for the LIVE, and the first one is made with the Floristry Stamp Set, stamped on Black Kraftstock with Glacier White Pigment Ink from Ranger, and then inked over to show color, plus colored in with the new Distress Spritz.  I love how these came out. Enjoy!

Cut a piece of Black Kraftstock to 8 inches.  Place the paper in the platform and add the flower image from Floristry, arranging it in the middle but more tilted like in a diamond shape. Stamp in Glacier White Pigment Ink from Ranger a few times until nice and crisp and bright white. Add a sentiment on both ends about 1 inch from the edges, and stamp those with the Glacier White, leaving all the stamps in place, just in case you need to restamp later.  Let this dry thoroughly or use a heat tool. I add two sided tape to the back before adding the wet color so the paper remains flat and does not bow up, fyi.

Using Detail Blending Tools, apply Distress Archival Ink to the white areas, starting with the leaves so that it is easier to make out all the flowers for later. I started with Crushed Olive on all the leaves, then added Rustic Wilderness over in the more shaded areas of the leaves, and then blended in Peeled Paint. I just dabbed the color on with the tool.

Apply the ink to the flower areas next. I used Fired Brick, Spiced Marmalade, Fossilized Amber, Dusty Concord, and Kitsch Flamingo. I also randomly color in the letters as well. When all are colored in give this a quick dry with the heat tool. 

Using the new Distress Spritz colors that coordinate best with the colors of ink (Twisted Citron, Peeled Paint, Barn Door, Spiced Marmalade, Fossilized Amber, Picked Raspberry, Wilted Violet), shake them up and get them ready to use along with a Detail Water Brush that is empty…you don’t need any extra wetness. Doing one color at a time, pour out a bit onto the glass or silicon mat (about a pea size) and pick up the color with the brush and color in the flowers first this time, trying not to go over any black areas if you can. Finish using the color on random parts of the letters of the sentiments. Wash out the color and then move on to another color, doing all the areas that you can with it so you don’t have to go back for more. Once all the flowers are colored move on the leaves. When all is colored in, add a little heat to make sure all is dry. 

Using a white pen of choice (I like a Gelly Roll) add some highlights on the flowers and leaves to help define them especially if you painted over the black areas like I did. If you stay on the colored areas with the white pen those are your highlights. Outline the letters if you wish and any leaf areas as well. Using a regular paper trimmer, cut the card in half so that each are 4 inches long and are now separated. Cut and fold two card bases to whatever you like…I used 4 x 5.5”. Ink the edges with Vintage Photo Distress Ink or another brown. Cut two white mat pieces to be flush with the top and showing 1/16” on the sides and bottom, so 3 7/8 x 5 3/8”, and add this on the base card using two sided tape. Using a Deckle Trimmer cut the flower card to 3.75 x 5.25” so that when you mount this just a bit of white mat is showing around the sides and bottom, but don’t add it yet. Add a piece of Tissue Tape to the bottom of each flower card so it’s between the words and bottom edge. I used the dots from the Trims set. Using a sanding tool, barely sand off the side edges and bottom to reveal the Kraft paper under the black. Ink those sanded sides with Vintage Photo. Then mount the flower card on top of the white mat. 

Supplies:

(Paper Trimmer, Stamp Platform, Heat Tool, Two Sided Tape, Detail Blending Tools, Detail Water Brush (Empty), White Pen, Deckle Trimmer, Sanding Tool, Scissors, Ink Blending Tool)

-Tim Holtz Idea-ology: Black Kraftstock, Trims Design Tape

-Stamper’s Anonymous Tim Holtz Stamp Set: Floristry

-Ranger Pigment Ink: Glacier White

-Ranger Tim Holtz Distress Archival Ink: Crushed Olive, Peeled Paint, Rustic Wilderness, Fired Brick, Spiced Marmalade, Fossilized Amber, Dusty Concord, Kitsch Flamingo

-Ranger Tim Holtz Distress Spritz: Twisted Citron, Peeled Paint, Barn Door, Spiced Marmalade, Fossilized Amber, Picked Raspberry, Wilted Violet

-Ranger Tim Holtz Distress Ink: Vintage Photo

-Ranger Surfaces: Kraft Cardstock

-Ranger Tim Holtz Distress Mixed Media Heavystock: White

Thank you so much for stopping by, and for all the comments here and on social media. I'll be back again soon with another make from the LIVE. Until then, I hope your hands get creatively dirty soon!

Tim Holtz Stamper’s Anonymous Spring 2024 - Curiosity Shop #1 Card

Hi Everyone! Thanks so much for all the love on my last post. Today, I have another card made with the new Curiosity Stamp Set from Tim Holtz and Stamper's Anonymous, that is more on the masculine side...I was thinking Father's Day, but really it could be anything. This stamp set is not only yummy vintage but nostalgic and fun as well, and I really had a lot of fun playing with it. It is super versatile and really can be used for so many occasions. Enjoy!

Cut a piece of Kraft Cardstock to 4 x 4 5/8”. Place the paper in the platform and add the bowler hat from the Curiosity Shop Stamp Set, about ½ inch down from the left side. Stamp in Black Soot Archival from Ranger. Clean the stamp off by stamping the remaining ink onto a sticky note, and then cut the hat out. Remove the bowler hat from the platform as you are finished with it. Place the sticky note over the bowler hat and then position the top hat upside down and above and to the right of the bowler hat so that it is still touching in the corner and close the platform to secure. Stamp it in the Black Soot. Clean the stamp off by stamping the remaining ink onto another sticky note, then cut it out. You are finished with that stamp.

Gather Pine Needles, Rustic Wilderness, Black Soot, Scorched Timber, and Walnut Stain Distress Oxides, as well as Picket Fence Distress Ink (which actually is a pigment ink as well so it’s perfect to use with Oxides) and the Labels Layering Stencil. Secure the Kraft card with the hats on the table with scotch tape up at the top, then add the sticky note masks on the hats.  Position the stencil over so the images are evenly spaced and lined up, and then add tape to secure it. Using the smallest Detail Ink Blending Tools, you will randomly ink in the individual label parts with the different colors of it. (Note: I was trying to go for the Starbucks green color, so I started with Rustic Wilderness then added Pine Needles on top and then a bit of Black Soot on top of that and then blended in to get that nice dark green.) The lines between the labels are very thin, so if you get another ink color on top of another, just blend it out with the other color. When finished, remove the stencil and clean it with water, remove the masks, and give this a good dry with the heat tool. 

(I made two of these so you can see the front and back on the same photo.) Use a paper trimmer to cut across the top of the hat paper and stop when you get to the top hat on both sides, and then use scissors to cut around the hat, as seen in the top left.  Flick a bit of water onto this to create a mottled look on the labels as well as to make sure all the ink is set, and dry with a heat tool. Ink around the edges with Gathered Twigs Distress Ink or another brown color. Flip the hat paper over to apply the two sided tape in all the correct places to allow the gift card and coffee lid plug sticks to fit correctly, as seen in the bottom left of the pic with the sticks and gift card used for measuring. You don’t have to use two sizes of tape, but I found that the ¼” and 1” worked perfectly. The main thing is to leave the top hat area deep for the sticks to go into so it will be sort of like a magic hat that holds long items, and to make an area for the gift card to fit into, while sealing up the rest of the border. I forgot to add the small paper punch (1/2”) to make a half circle cut in the middle of the border area for the gift card to allow it to be easily pulled out. Set this aside now.

For the background of the card, cut a piece of SSP to 4 5/8 x 6 5/8”. Directly onto the Glass Mat, apply Gathered Twigs Distress Ink straight from the pad randomly a few times (you will not be able to see it well), as well as Pine Needles Distress Oxide, and Walnut Stain Oxide, randomly in about a 6x6” area, and mist pretty well with water. Take the SSP and run it through the wet inks, and dry a short bit with the heat tool, and then continue to tap the paper into the wet, dry it, tap again, dry until you like the look of it, and then dry completely. Ink the edges well with the Gathered Twigs and bring it onto the surface around the borders a bit. Then lightly mist with water to get the tiniest water spots to really finish off a beautiful marble look. I did two in the photo to show you how different each will be and still be gorgeous. Dry with a heat tool. 

Place the paper into a stamp platform, and taking the number strip image (I only used 1, 2, and 3 so I cut those from the strip to make stamping a bit easier.) stamp the 1 in Pine Needles Distress Ink (I forgot to add it in the photo), and the 2 and 3 in Black Soot Archival. You can do both color at the same time being careful to only apply the inks to the correct numbers. Continue the pattern so that the 1 is skipping around some, and until you have two rows of numbers. Dry this well as ink stays wet longer on SSP. Take a piece of green colored Design Tape and affix it below the numbers and around the back to secure it well. The rest of the paper will not be seen as the hat paper will cover it up. Set these aside for now.

Taking more SSP, about 3.5 x 8.5”, place into the stamp platform, and arrange the typewriter and both pointing hands on, leaving room for two more hands at the bottom. Close the lid to secure. Stamp the images with Black Soot Archival Ink, and then dry with the heat tool. Turn the paper upside down to stamp the other two hands, and then dry again. (I cut mine off not thinking about it being better to leave them in place in case I had to restamp later.) Leave the images in place on the platform in case you have to restamp after coloring them in….always a good thing to do. (HUGE NOTE: I used a Craft Knife to cut around the typewriter parts to insert the paper behind the those parts, BUT if I would have just not inked that top part where it looks like the paper is stopped and left that open, I could have just cut a paper shape coming off that, and wouldn’t have had to use the craft knife and made life much easier.)

(Like my Oxides, I hadn’t used the Crayons in awhile so I decided to use those for coloring this, and there are two shown here, but I only ended up using the left side one.) Using Distress Crayons and a Detail Water Brush, color in the hands with Tattered Rose and Tea Dye by applying some Crayon to the white mat and picking up with the brush. Use Hickory Smoke to color in the suit and most of the typewriter, as well as Black Soot. For the hats I colored in the bands with Pine Needles Distress Ink since it was laying right by me instead of the Crayon. I used Tea Dye on the bowler and Hickory Smoke on the top hat. Back to the typewriter, go over all the metal parts with a little Iron Gate Crayon to add a nice pearly sheen. Tea Dye was great for the inside of the keys for a little aged look. Once dry, use a silver metallic pen for thin metal parts to make them stand out. I also used a gold metallic pen and made some scribbles to make it look like there might be wording on the typewriter. Once finished, I added two sided tape to the back, and thought about restamping as mentioned above, but I thought everything looked ok.

I cut out all the parts, and used a craft knife to cut around the top typewriter parts which was tedious, so please see what I mentioned above about saving myself the time.  I used a black permanent marker to edge all the pieces since they were small and some parts too tight to get a blended tool in there. I cut a small piece of SSP to be the paper for the typewriter that would fit about 2x2”, and stamped the sentiment first from the Curiosity set, and found the word ‘you’re’ on another old stamp on the Stuff to Say set, instead typing it myself on my typewriter which would have been much smaller, and I stamped those in Black Soot Archival. I found the ‘No. 1’ on the Eccentric Remnant Rubs set and added it below. I also added the two extra dots after the sentiment with the black permanent pen. I edged around the paper with the same pen, and then attached the paper to the back of the typewriter with two sided tape, and then I added it to the right side of the card. I used Glossy Accents on all the typewriter’s keys as well. For the fingers, I added a tiny bit of Collage Medium to the coffee lid plug sticks, and then removed the backing of one, and stuck it on above the notch, and then added the finger behind it matching it up and pressed them tightly to seal them together. I did the other the same way, and then added them inside the top hat, pushing them as far as could go and arranging them to look as though they are laying in the hat, then I added the gift card. 

Supplies:

(Paper Trimmer, Stamp Platform, Scissors, Sticky Note, Glass Mat, Tape, Detail Ink Blending Tool, Heat Tool, Water Mister, Two Sided Tape (1”, ¼”), Ink Blending Tool, ½” Small Circle Punch, Detail Water Brush, Craft Knife, Rub On Tool)

-Ranger Surfaces: Kraft Cardstock, Specialty Stamping Paper

-Stamper’s Anonymous Tim Holtz Stamp Set: Curiosity Shop

-Ranger Tim Holtz Distress Archival Ink: Black Soot

-Stamper’s Anonymous Tim Holtz Layering Stencil: Labels

-Ranger Tim Holtz Distress Oxide Ink: Pine Needles, Rustic Wilderness, Black Soot, Scorched Timber, Walnut Stain

-Ranger Tim Holtz Distress Ink: Picket Fence, Gathered Twigs, Pine Needles

-Tim Holtz Idea-ology: Travel Design Tape, Black Kraftstock, Eccentric Remnant Rubs

-Ranger Pigment Ink: Glacier White

-Ranger Tim Holtz Distress Crayons: Tattered Rose, Tea Dye, Hickory Smoke, Black Soot, Iron Gate

-Stamper’s Anonymous Tim Holtz Stamp Set: Stuff to Say

-Ranger Glossy Accents

-Ranger Tim Holtz Distress Collage Medium: Matte                                          

-Silver and Gold Metallic Extra Fine Pen, Black Permanent Marker, Gift Card, Green Coffee Lid Plug Sticks

Thank you so much for stopping by here today, and for all the wonderful comments on social! Until next time, I hope your hands get creatively dirty soon!