Tim Holtz Sizzix Christmas 2024 - Christmas Brooches

Hello Everyone!  Here are the last of the Brooches I've made this year using the new Christmas Vault Series Dies from Tim Holtz and Sizzix, and seen in the LIVE last week. I have thoroughly enjoyed making each single one, and appreciate all the many comments and questions on them. AND speaking of questions...it looks like Ice Resin from Ranger was discontinued, and there are no more of packs of just the resin, BUT they still have a few of the Alcohol Ink kits with Ice Resin in them. Click on this link to see it, and even though Alcohol Ink is in there you can use it on another project.  Ice Resin is just a simple two part system that you mix together and then pour over your project....don't be scared to try resin. So many of the questions and comments I've gotten are about being timid to try it. If you don't try how will you know. Anyway, The sizes of the Dies in the Vault series really are the perfect sizes for making jewelry pieces, and the detail is wonderful and you really don't need a lot of bling on them. I made the first two brooches separately from the last four, so the step out pictures are grouped. Enjoy!

 

Note: I did the Poinsettia and Snowflake Brooches first, and then did the Sleigh, Snowmen, and Skates later and a bit different since they had many die cut layer parts.

(In this picture you are seeing the back of the brooches.) To begin the first two brooches, I added two sided tape to the back of what I would be using for the center layers, which is 2 layers of whatever cardstock I had (I think it was black heavystock which wouldn't be seen) and I die cut the solid base portion of the poinsettia, leaves, (from Vault Seasonal Sketch) and snowflake (from Vault Winter Wishes), and then I went ahead and did the backing parts in silver metallic and gold metallic since these weren't going to be die cut heavy layered like the previous brooches, as the snowflake is just one piece and the poinsettia two with two leaf parts. To do the backing, you add two sided tape to the metallic, but die cut the base piece from the two sided tape side instead of the front metallic side (don't remove the insides from the snowflake). Then I adhered them all together. Then I die cut the base pieces again that would be seen in colored Metallic Kraftstock with two sided tape on the back, so a solid red for the poinsettia, two colors of green for the leaf, and a blue for the snowflake, but not taking out the little pieces in the centers and instead keeping them in place for the snowflake (see the next photo).

 

 

Here you can see the fronts now. I added two sided tape to more silver (snowflake) and gold Metallic (poinsettia) and then die cut the parts I call the frames or the second top parts of each for the poinsettia and leaf, and for the snowflake I removed the center pieces so that it will now be a frame. I added the frame parts on top, and used a bit of Collage Medium on the border parts to make sure they stayed in place. I used Metallic Leafing Pens to color the sides of each to match the backs and frames so no Kraft paper was showing. 

 

 

I was going for a pearlized enameled look for these two brooches, so I thought using some Distress Spritz from Ranger, would do the trick. Using a detail paintbrush and after shaking each color well, I poured out a tiny bit of the Spritz and painted it in the open areas... Barn Door for the poinsettia, Twisted Citron and Peeled Paint for the leaf, and Mermaid Lagoon for the snowflake. It did pearlize the Metallic paper some but not to the degree I wanted probably because of the foiled surface, but it was still dreamy yet subtle. I also used tiny letter metal stamping punches and a Craft Hammer for my initials onto Metallic Kraftstock, and added those to the back of each piece for my maker marks using Glossy Accents. Then I adhered the poinsettia to the front of the leaf with more Glossy Accents. 

 

 

I added Silver Droplets on the snowflake frame and gold to the center of the poinsettia. I decided to also add rhinestones and they were not the color I needed so I dyed them with Alcohol Pearls, Tranquil for the ones on the snowflake, and Sublime for the green ones in the center of the poinsettia. I just colored them directly with a Qtip. Then I adhered all the bling with Glossy Accents. The bling takes a while to do, but it’s so worth it.

 

I mixed the Ranger Ice Resin as directed, by pushing the plunger down, and into a cup, mixing well, and poured it over the pieces on a baking cooling rack I have designated for Art, with a piece of wax paper underneath. I tried to do as heavy as a coating as I could and I kept these on the rack over night, moving them around every hour using a craft pick so they didn’t get stuck in place. By morning they were dry and not stuck in place. The package says they totally cure after 48 hours.

 

 

After the resin hardened,  I die cut Matchbooks from Kraft, and added the words cut from the Vault Holiday Classics using the same metallic colors for the front. I used pliers to bend the hook of pin in a little more so that there wasn’t more tension to secure the pin in the closure hopefully alleviating people from pulling on the pin too much to latch it. I added the pins to the back of each brooch so they wouldn’t be seen using lots of Glossy Accents., and then I coated the whole back with more Glossy Accents for added strength again, and let them dry. Once dry, I measured and marked where both ends of the back of the pin would be on the Kraft Matchbooks and punched holes for them, and then used scissors to cut a line between the holes. The back of the pin just pushes through the line into the holes and stays in place. 

 

 

 For the two Snowmen and Ice Skates with Greenery, I die cut the base skates and snowman from a white pearlized cardstock I had in my stash which I do not remember where it came from. I add two layers of black heavystock cut base pieces under for added strength. Then I added two sided tape to the back of metallic colors and die cut all the detail parts, which were many on the greenery, and did not remove the backing so I could play with placement of all the parts. For the snowmen it was easy as they have embossed lines showing where to go, but on the greenery I went rogue and just started playing.

 

  

 Here is a close up of the beginnings of the greenery on each skate. Once I liked it, I adhered the skates together with Glossy Accents, and then flipped it over to the do the backs, adding silver metallic backs to each piece, so this brooch is quite thick (see the picture below of the finished back). The snowman has just one solid silver metallic piece on the back.

 

 

For the sleigh, I went a bit different, by cutting many of them out in different metallics, all backed with two sided tape, and trimming off what I didn't want for each layer. So I started with green as a base, then light gold with the toy sack cut off and added that on, then deep brownish gold with Santa completely cut off, as well as the antlers and hoofs of each reindeer and added that on. On the red, I cut Santa's body, his hat, and the sleigh out, and added those parts on only, and nothing on the reindeer. Then on the bright gold layer I cut out only the sleigh legs and trim and added only that on. Then I die cut only the santa part out from the pearlized white scrap from the skates only for his beard and suit parts and added those on. Then I die cut one last time using black Kraftstock, and carefully cut the parts of the reins for the reindeer going all the way to the sleigh. This took some time and planning, and I totally forgot to take a photo, but just imagine the harnesses and reins and only cut those. I added a little bit of colored rhinestones to all the brooches, colored with Alcohol Ink, and then did the resin and pins the same as all the others. For these last 4 brooches I cut black tags to fit them and flicked Picket Fence Distress Paint on them for a snowy effect and when dry cut the holes and line between them to secure the brooches.

 

 

Supplies:

(Paper Trimmer, Two Sided Tape, Die Cut Machine, Die Pick, Scissors, Small Paintbrush, Water Mister, Craft Hammer)

-Sizzix Tim Holtz Thinlits (Christmas Vault Series 2024): Vault Winter Wishes, Vault Seasonal Sketch, Vault Holiday Classics, Vault Festive Wreath, Vault Christmas Magic 

-Tim Holtz Idea-ology: Metallic Classics Kraftstock, Metallic Colors Kraftstock, Metallic Droplets, Mirrored Stars

-Ranger Tim Holtz Distress Watercolor Paper

-Ranger Glossy Accents

-Ranger Tim Holtz Distress Spritz: Barn Door, Twisted Citron, Peeled Paint, Mermaid Lagoon

-Ranger Tim Holtz Alcohol Pearls: Tranquil, Sublime

-Ranger Ice Resin

-Sizzix Tim Holtz Movers & Shapers Large Die: Matchbook Set

-Ranger Surfaces: #10 Black tags

-Ranger Tim Holtz Distress Paint: Picket Fence

-Gold and Silver Metallic Markers, Metal Letter Punches, Various Rhinestones, Cup and Stir Stick for Resin, Brooch Pins

 

Truly I thank you all for all the wonderful comments on this whole Brooch series for the Holidays. My cup runneth over! Until next time, I hope your hands get creatively dirty soon!

Tim Holtz Sizzix Christmas 2024 - Christmas Magic City Card

Hello All and Happy September (Stamptember too!). I know I say it every time, BUT... Did you watch the Tim Holtz Sizzix Vault Christmas Release Live??? OH MY GOSH! FABULOUS JUST FABULOUS!!! The projects were ALL AMAZING and spirit lifting with the Christmas and Holiday themes. My heart is happy having just watched it, and my head is full of ideas and inspiration. I am so honored to be apart of it. Here is a Christmas Card I made shown in the Live, made with the new Vault Series of Dies...Christmas Magic, Holiday Classics, and Seasonal Sketch. This whole year of Vault goodness has been wonderful to revisit these older shapes and images all in new sizes. Even though I have all the original dies, it's been so long since I've used most. So revisiting them and actually digging through my stash for older loot has been refreshing. Thank you Tim! Enjoy everyone.

 

Cut a piece of Black Kraftstock to 4.5 x 6.5 inches. Die cut 5 of one of the words from the Vault Holiday Classics Thinlits using whatever cardstock you want as these will be masks only (I used 'wish'.). Place the Kraftstock in a spray box or only papertowels, and arrange the 5 words on it evenly. Shake the Uncharted Mariner Distress Spritz from Ranger well, and then mist over the words covering the paper. Clean the hole of the Spritz before putting it up so it won't clog next time. Carefully remove the words and use them for another project. Let this dry. 

 

 

 Shake up the Weathered Wood Distress Spritz and then mist it over the whole paper minus the masks this time. Clean the hole of the Spritz as before, and let this dry and set aside.

 

  

Apply two sided tape to the back of six colors of Metallic Classics Kraftstock, making sure each piece will be big enough for the 'city scape' die. Apply two sided tape to the back of three pieces of red and three pieces of green from the Metallic Jewels Kraftstock, making sure each piece will be big enough for the 'city scape' die. Using the Vault Christmas Magic Thinlits, the 'city scape' die, die cut all 12 of the pieces so you will have 6 of the Metallic Classics and three each of the green and red Metallics, but do not remove any of the windows from the red and green, and save the scraps on the red and green as you will need those. Only remove the windows from the Classic Metallics. (Sorry the picture does not show the red and green before layering.) Remove the backing on the Classic Metallic ones and adhere them over the red and green ones, so that you will see either green or red in the windows of the Classic color city scapes.

 

   

Add more two sided tape to a piece of Black Metallic from the Classics collection big enough for Santa and the sleigh, and then die cut it. Add two sided tape to some silver for the base of the 'moon' die  as well as another Santa Sleigh, and die cut those. Add two sided tape to some Watercolor Cardstock and die cut the top layer of the moon and then remove the inner pieces of it. Using the scraps from the green and red Metallic Kraftstock, die cut the letters...3 H's and 3 O's...from the Vault Seasonal Sketch Thinlits. Ink around the edges of both in the inside and out of the moon face with Lost Shadow Distress Ink, and then layer it on top of the silver base. Layer the Black Metallic Santa over the Silver Metallic Santa with the Silver showing a shadow to the right side a bit, and then ink around the edges of the Santa Sleigh with Black Soot Distress Ink. 

 

 

 Cut and fold a Kraft cardstock base card to 5 x 7 inches, and ink the edges with Black Soot. Cut a silver metallic mat to 4.75 x 6.75 inches and add to the front of the Kraft. Ink the edges of the misted words piece with Black Soot, and then adhere the misted words piece on top. Remove the backing of the silver city scape and adhere it above 1.25 inches above the bottom edges of the misted words piece. You will have three rows of city scape (silver, gold, and black last) that you will stagger and so that all the towers can be seen, and you will use the light gold, darker gold, and copper city scape pieces as fill ins by cutting each building off separately and layering them on an existing matching building. Some of the bottom buildings will need foam tape to stand out and be layered nicer so have it close by. So in my picture, I worked on a silver, gold, and black row of city scape pieces first before adhering everything on until I liked the placement of the light gold, darker gold, and copper pieces that I cut off. I also inked the edges of all the pieces with Black Soot before adhering. To finish off, I cut a strip of Watercolor Cardstock the same length of the city scapes and cut the upper border to look like rolling hills. Then I misted it lightly with more Weathered Wood Distress Spritz and then added this on. I staggered the 'HO HO HO' onto this and adhered those on, and I added the moon above and then Santa.

 

Supplies: 

(Paper Trimmer, Two Sided Tape, Die Cut Machine, Die Pick, Scissors, Ink Blending Tool)

-Ranger Surfaces: Manila Cardstock, Kraft Cardstock

-Sizzix Tim Holtz Thinlits (Christmas Vault Series 2024): Vault Holiday Classics, Vault Christmas Magic, Vault Seasonal Sketch 

-Tim Holtz Idea-ology: Black Kraftstock, Metallic Classics Kraftstock, Metallic Jewels Kraftstock

-Ranger Tim Holtz Distress Spritz: Uncharted Mariner, Weathered Wood

-Ranger Tim Holtz Distress Watercolor Paper

-Ranger Tim Holtz Distress Ink: Lost Shadow, Black Soot

-Ranger Surfaces: Kraft Cardstock

-Ranger Foam Tape: Black

 

Are you already getting in the Holiday Spirit now? LOL! Thanks for stopping by. I'll be back soon with another Christmas make. Until then, I hope your hands get creatively dirty soon!

Tim Holtz Stamper's Anonymous Halloween 2024 - Boo Sheet Halloween Party Treat Sacks & Tags

And I'm back to show you the last little project to go with the Boo Sheet Halloween Party theme, using the new stamps and stencils from Tim Holtz and Stamper's Anonymous, and seen in the Live last Saturday. I really can think of several other decor pieces to make with these for a party, as the images are so stinking cute. Don't you agree? Enjoy these Treat Sacks and Tags! 

 

(NOTE: The Archival Ink takes a bit longer to dry on the glassine, so take care not to smear it, or use a heat tool to help dry.) Place a white glassine bag in the platform and take the small extra ghost stamp on the lower right side of the glassine just for placement so don't close the lid yet. Take the mini witch's hat, broom, and pumpkin pail from the Mini Bird Crazy & Things and figure out the best placement of them using the little ghost. Remove the ghost and then stamp the mini things in Black Soot from Ranger.  Place another glassine bag in and repeat and do as many as you want. Clean the stamps off by stamping the remaining ink from them onto a large sticky note, and then cut the images out. You are finished with these stamps so remove them.  Place the sticky notes on the images and then add the little ghost on and stamp it in Black Soot over the sticky notes. Place another glassine bag in and repeat and do as many as you want.  Clean this stamp off on another sticky note and cut it out. Remove the little ghost as you are finished with it.  Take the large ghost stamp and place it next to the little witch ghost in the center area of the glassine just for placement so don't close the lid yet. Take the bowler hat and pumpkin pail from the Crazy Things and figure out the best placement of them using the large ghost. Remove the ghost  and then stamp the images in Black Soot. Place another glassine bag in and repeat and do as many as you want. Clean the stamps off by stamping the remaining ink from them onto another sticky note, and then cut the images out. You are finished with these stamps so remove them.  Place the sticky notes on the images as well as the broom sticky note,  and then add the large ghost on and stamp it in Black Soot over the sticky notes. Place another glassine bag in and repeat and do as many as you want. Clean this stamp off on another sticky note and cut it out. Remove the large ghost as you are finished with it. Place all the sticky notes on the images and then arrange the large web over them and close the lid to secure the stamp. Stamp the web in Hickory Smoke Archival Ink. Place another glassine bag in and repeat and do as many as you want. Remove this stamp and add the two sentiments or whatever you want, as well as the bow tie on the large ghost, and stamp them in Black Soot Archival Ink. Remove all the stickys and save for another time. Place another glassine bag in and repeat and do as many as you want, and don't worry about the sticky notes anymore.

 

Take #8 Black Tags for as many of the treat sacks as you are making, and cut off the bottom two inches on each and save those for another project. Place a tag in the platform and add a sentiment from the Halloween Whatnots Stamp Set just below the tag holes. Speaking of the tag holes, I don't like that brownish color for these tags so I color it in with Black Soot Archival Ink, FYI. Close the lid to secure the sentiment and then stamp it with Glacier White Pigment Ink a few times to make it nice and bright. Repeat with more tags and sentiments. Let this ink dry a while or use a heat tool. Take the Mini Jacks Layering Stencil and place it below the sentiment along the bottom border of the tag so that two open pumpkins are centered along the bottom. Using a clean foam and ink blending tool, ink in the solid pumpkins with Glacier White Pigment Ink and then let dry. If you get white anywhere you don't want it use a black pen and Black Soot Archival to cover it up....the beauty of using a black surface.

 

Using Distress Watercolor Pencils and a Detail Waterbrush, color in the parts of the sentiments that you want, as well as oranges for the solid pumpkins with green stems, but I kept the center pumpkin white, as well as the accessories on the ghosts with the glassine bags.  Keep in mind that the pencils will color over the black portions, but again you can use a pen to color them back black on the tags. The water makes the glassine slightly buckle but it will flatten out when dry. See below for the colors I used. For the witch's buckle on the hats, I used Antique Bronze Distress Crayon with the Waterbrush. Use a white pen to add dots in each of the centers of the eyes, as well as add eyelashes to the little witch. Let the bags dry well. Place the face part of the Jacks stencil over the pumpkins and use Black Soot Archival to color them in. Select letters for a name or initials using the Halloween Transparent Tiles and secure those on to the bottom of the tag edge using two sided tape. Crinkle up some Halloween Fringe and use two sided tape to secure it on over the top of letters. Add ribbon to the tag hole and tie it onto the fold down bag through a hole made with a hole punch once your bag is filled with treats. 

 

 

Supplies:

(Stamp Platform, Scissors, Sticky Note, Water Mister, Detail Waterbrush, Paper Trimmer, Ink Blending Tool, Two Sided Tape)

-Stamper’s Anonymous Tim Holtz Stamp Set (Halloween 2024): Boo Crazy, Halloween Whatnots  

-Ranger Tim Holtz Distress Archival Ink: Black Soot, Hickory Smoke

-Stamper’s Anonymous Tim Holtz Stamp Set: Crazy Things, Mini Bird Crazy & Things

-Ranger Tim Holtz Distress Watercolor Pencils: Spiced Marmalade, Crackling Campfire, Peeled Paint, Gathered Twigs, Hickory Smoke

-Ranger Tim Holtz Distress Crayon: Antique Bronze

-Ranger Surfaces: Black #8 Tags

-Ranger Pigment Ink: Glacier White

-Stamper's Anonymous Tim Holtz Layering Stencil: Mini Jacks 

-Tim Holtz Idea-ology: Halloween Transparent Tiles, Halloween Fringe, Halloween Trimmings

-White Glassine Sacks A2, Black Pen, White Pen 

 

I'd love to see if you make any of these or add to theme with a whole new make...let me know! Thanks again for all the comments! I'll be back again soon. Until then, I hope your hands get creatively dirty soon!

Tim Holtz Stamper's Anonymous Halloween 2024 - Boo Sheet Halloween Party Favors

Hello again! Here are some party favors for the Boo Sheet Halloween Party, made with the new stamps from Tim Holtz and Stamper's Anonymous as seen in the Live last week. I just totally love the little ghosts, and really tried hard to make time to also make a banner as that would be too cute, but I'll leave that up to you all, as time did not permit. Enjoy!

 

(I only made four but you can make as many as you want.) Cut a piece of White Heavystock to about 6 x 6 inches or so for ample room to stamp four ghosts and their accessories (the top three from the Spooky Spirits Set and the little extra ghost from the Boo Crazy Set), and place it in the platform. Doing one ghost stamp at a time, place one of them on a corner portion on the paper just for placement so don't close the lid yet. Take the mini accessories that you want (hats, pumpkin pail, bows, etc.) from the Mini Bird Crazy & Things and figure out the best placement of them using the ghost you selected. Remove the ghost and then stamp the mini things in Black Soot from Ranger. Clean the stamps off by stamping the remaining ink from them onto a sticky note, and then cut the images out.  Place the sticky notes on the images and then add the ghost on and stamp it in Black Soot over the sticky notes. Repeat this process for all the remaining ghosts. Once you have all the ghosts you want with all their accessories, cut them out.

 

 

Cut a piece of Kraft Cardstock to 2 x 8 inches, and place it in the platform. Arrange four of the 'boo sentiments' from the Spooky Spirits Stamp Set or whatever one you'd like to use, evenly in the center of the paper (so about 1/2 inch wide space for each) and close the lid to secure, and then stamp in Black Soot. Cut these apart in 1/2 inch strips, and add two sided tape to the backs.

 

 

Using Distress Watercolor Pencils and a Detail Waterbrush, color in the parts of the accessories on the ghosts that you want. Keep in mind that the pencils will color over the black lines, so you will need to use a black marker to fix them like I did. See below for the colors I used.  Use a white pen to add dots in each of the centers of the eyes, and a black marker to make eyelashes on the girls. Using more White Heavystock, cut 1/4 inch by about 3 inch strips for the straps that will hold the ghosts on the straws and add two sided tape to them.

 

Ink the edges of the ghosts and kraft sentiments strips with Gathered Twigs Distress Ink. Take the straws and kraft strips first and wrap one around the straw in half to see where you will bend it so that the wording will be seen about 1.5 inches from the top of the straw. Remove the tape backing and press the wording together around the straw. Use scissors to fish tails the ends and then ink those edges. Take a white strip in the middle and press the middle part around the straw to form it around with arms remaining flat out, and then remove the backing to secure it about 1.5 inches from the wording. Add a ghost onto the arms of the white strip pressing to secure it, and then trim any of the arms hanging off the back of the ghost. Unravel the Halloween Fringe and roll it around your palm to fluff it up. Cut off 2 one inch strips and add two sided tape to the back, and then secure one above the wording and one below the ghost. Repeat for as many as you'd like.  

Supplies:

(Paper Trimmer, Stamp Platform, Scissors, Sticky Note, Water Mister, Detail Waterbrush, Ink Blending Tool, Thin Two Sided Tape)

-Ranger Tim Holtz Distress Heavystock: White

-Stamper’s Anonymous Tim Holtz Stamp Set (Halloween 2024): Spooky Spirits, Boo Crazy  

-Ranger Tim Holtz Distress Archival Ink: Black Soot

-Ranger Surfaces: Kraft Cardstock

-Ranger Tim Holtz Distress Watercolor Pencils: Spiced Marmalade, Crackling Campfire, Peeled Paint, Gathered Twigs, Hickory Smoke

-Ranger Tim Holtz Distress Ink: Gathered Twigs

-Tim Holtz Idea-ology: Halloween Fringe

-8 Inch Black and White Paper Straws, White Pen 

 

Thanks so much for stopping by! I'll be back tomorrow with the last make for this party theme. Until then, I hope your hands get creatively dirty soon!